Perancangan Alat Bantu Analisis Rapid Entire Body Assessment (REBA) Berbasis Aplikasi Android

Dawi Karomati Baroroh, Ramadhan Ramadhan

Abstract


Work posture analysis is important because the wrong work posture can cause discomfort and fatigue in workers that can cause musculoskeletal disorder (MSDs). Rapid entire body assessment (REBA) is one of semi-quantitative posture analysis methods that are sensitive to the risk of MSDs in various occupational types. REBA analysis is usually done manually, so it takes a long time and there is a possibility of error. Therefore, it is necessary to design an REBA tool based on Android application analysis to facilitate and accelerate in posture analysis. This paper designed a tool of REBA analysis based on the Android application using MIT App Inventor 2. Furthermore, verification tests, validation, and usability tests are performed on the application design. There is also time comparison of REBA analysis manually and by using application (case study in Small and Medium Industries Aluminum, Giwangan, Yogyakarta). The results of this study indicate that the design of REBA applications based on Android has met the verification and validation test. Based on the usability test performed using System Usability Scale (SUS) method, the value obtained is 63.5, which means quite useful. In addition, the results of comparative REBA analysis times indicate a significant difference between manual calculation time and using the application, with time savings of REBA analysis using application of 51.19%.

Keywords


Analisis Postur, REBA, Aplikasi Android, Usability

Full Text:

PDF

References


H. Nadri, F. Fasih, F. Nadri, dan A. Nadri, “Comparison of Ergonomic Risk Assessment Outputs from Rapid Entire Body Assessment and Quick Exposure Check in an Engine Oil Company,” JOHE, Vol. 2, No. 1, hal. 195–202, 2013.

G. David, V. Woods, G. Li, dan P. Buckle, “The Development of the Quick Exposure Check (QEC) for Assessing Exposure to Risk Factors for Work-Related Musculoskeletal Disorders,” Appl. Ergon., Vol. 39, No. 1, hal. 57–69, 2008.

D. Kee dan W. Karwowski, “A Comparison of Three Observational Techniques for Assessing Postural Loads in Industry,” Int. J. Occup. Saf. Ergon., Vol. 13, No. 1, hal. 3–14, 2007.

M.-È. Chiasson, D. Imbeau, K. Aubry, dan A. Delisle, “Comparing the Results of Eight Methods Used to Evaluate Risk Factors Associated with Musculoskeletal Disorders,” Int. J. Ind. Ergon., Vol. 42, No. 5, hal. 478–488, 2012.

S. Hignett dan L. McAtamney, “Rapid Entire Body Assessment (REBA),” Applied Ergonomics, Vol. 31, No. 2, hal. 201–205, 2000.

T. Jones and S. Kumar, “Comparison of Ergonomic Risk Assessments in A Repetitive High-Risk Sawmill Occupation: Saw-Filer,” Int. J. Ind. Ergon., Vol. 37, No. 9–10, hal. 744–753, 2007.

P. Drinkaus, R. Sesek, D. Bloswick, T. Bernard, B. Walton, dan B. Joseph, “Comparison of Ergonomic Risk Assessment Outputs from Rapid Upper Limb Assessment and the Strain Index for Tasks in Automotive Assembly Plants,” Work, Vol. 21, No. 2, hal. 165–172, 2003.

G. Li dan P. Buckle, “A Practical Method for the Assessment of Work-Related Musculoskeletal Risks – Quick Exposure Check (QEC),” Proceedings of Human Factors and Ergonomic Society 42nd Annual Meeting, 1998, hal. 1351-1355.

M. Motamedzade, M. R. Ashuri, R. Golmohammadi, dan H. Mahjuba, “Comparison of Ergonomic Risk Assessment Outputs from Rapid Entire Body Assessment and Quick Exposure Check in an Engine Oil Company,” J. Res. Health Sci., Vol. 1, No. 1, hal. 26–32, 2011.

Ramadhan dan D. K. Baroroh, “Perbandingan Sensitivitas Metode REBA, OWAS dan QEC dalam Evaluasi Tingkat Risiko Postur Kerja. (Studi Kasus di WL Aluminium Giwangan),” Seminar Nasional Teknik Industri Universitas Gadjah Mada, 2017, hal. ER93-ER102.

R. Hutomo, I. Iftadi, dan C. N. Rosyidi, “Perancangan Aplikasi Reba Solver Berbasis Sistem Operasi Android V 4.0.3,” Performa, Vol. 12, No. 1, hal. 69–78, 2013.

B. Pudjoatmodjo dan R. Wijaya, “Tes Kegunaan (Usability Testing) pada Aplikasi Kepegawaian dengan Menggunakan System Usability Scale,” Semin. Nas. Teknol. Inf. dan Multimed. 2016, 2016, hal. 37–42.

D. Wolber, H. Abelson, E. Spertus, dan L. Looney, App Inventor 2: Create Your Own Android Apps, Sebastopol, USA: O’Reilly Media, Inc, 2014.

D. C. Montgomery, Applied Statistics and Probability for Engineers Third Edition, Hoboken, USA: JohnWiley & Sons, 2003.

A. Bangor, P. Kortum, dan J. Miller, “Determining What Individual SUS Scores Mean: Adding an Adjective Rating Scale,” J. Usability Stud., Vol. 4, No. 3, hal. 114–123, 2009.

E. Susilo, F. D. Wijaya, dan R. Hartanto, “Perancangan dan Evaluasi User Interface Aplikasi Smart Grid Berbasis Mobile Application,” JNTETI, Vol. 7, No. 2, hal. 150–157, 2018.




DOI: http://dx.doi.org/10.22146/jnteti.v7i3.434

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Jurnal Nasional Teknik Elektro dan Teknologi Informasi (JNTETI)

JNTETI (Jurnal Nasional Teknik Elektro dan Teknologi Informasi)

Departemen Teknik Elektro dan Teknologi Informasi, Fakultas Teknik Universitas Gadjah Mada
Jl. Grafika No 2. Kampus UGM Yogyakarta 55281
+62 274 552305
jnteti@ugm.ac.id